Drywall Installation Cost in Sacramento CA: 2026 Pricing Guide
If you’re planning a drywall project in Sacramento, the first question on your mind is: how much is this going to cost? Whether you need a small patch in Midtown or a full drywall installation in a new Roseville home, understanding real local pricing helps you budget smart and avoid surprises.
At Dr. Drywall, we’ve completed hundreds of projects across Sacramento, Roseville, Elk Grove, and Folsom. In this guide, we break down the drywall installation cost in Sacramento CA for 2026 — by project type, room size, and finish level.
Ready to skip the research? Call (279) 900-6862 for a free estimate — we respond same day.
Average Drywall Installation Cost in Sacramento CA (2026)
In the Sacramento area, drywall installation costs between $2.00 and $3.50 per square foot for labor and materials combined. The final price depends on the scope of work, the type of drywall, and the finish level you choose.
| Project Type | Typical Cost | Notes |
|---|---|---|
| Small patch repair (1–6 sq ft) | $150 – $350 | Holes, cracks, water damage spots |
| Single room (12×12 ft) | $800 – $1,400 | Standard 1/2” drywall, texture match |
| Full room renovation | $1,800 – $3,500 | Tear-out + new install + tape + texture |
| Whole home (2,000 sq ft) | $4,000 – $7,000 | New construction or complete remodel |
| Garage conversion / ADU | $2,500 – $5,000 | Framing + fire-rated drywall often required |
| Commercial space | $3.00 – $5.50/sq ft | Metal stud framing, fire-rated board |
Prices reflect Sacramento/Roseville area labor rates as of 2026. Scope, access difficulty, and finish type can affect final cost.
What Affects Drywall Cost Per Square Foot in Sacramento?
Not all drywall jobs are the same. Here are the main factors that raise or lower your drywall cost per square foot in Sacramento:
1. Type of Drywall Board
- Standard 1/2” drywall: $0.50–$0.65/sq ft (material only) — used in most interior walls
- Moisture-resistant (green board): $0.75–$0.95/sq ft — recommended in Sacramento kitchens and baths where humidity is high during the rainy season (November–March)
- Fire-rated Type X: $0.80–$1.10/sq ft — required for garages, ADUs, and commercial projects under California building code
- Soundproof board: $1.50–$2.50/sq ft — used in home offices and multi-family units
2. Finish Level
Sacramento contractors typically price by GA-214 finish levels. The higher the level, the more labor involved:
- Level 3: Texture applied — standard for most Sacramento homes
- Level 4: Smooth finish, light texture — popular in East Sacramento and Land Park remodels
- Level 5: Skim coat (skin coat) — premium finish, adds $0.50–$1.00/sq ft
3. Texture Style
Most older homes in Sacramento have knockdown or orange peel texture. Matching existing texture takes more skill and time than a fresh install. Skip trowel, popular in Folsom and Roseville new builds, is the most labor-intensive option.
4. Tear-Out and Disposal
If old drywall needs to be removed first, expect to add $0.50–$1.00/sq ft for tear-out and haul-away. Older homes in Curtis Park, Midtown, or Arden-Arcade may have lathe-and-plaster walls that take longer to demo.
How Much Does Drywall Cost in Roseville CA vs. Sacramento?
Pricing in Roseville and Placer County runs about 5–10% higher than central Sacramento, due to higher demand in active new-construction neighborhoods like West Park, Fiddyment Farm, and Crocker Ranch. However, the difference is minor on a whole-room job — usually $100–$300 total.
We serve all of Sacramento County and Placer County at competitive rates with no travel surcharge for most service areas.
DIY vs. Hiring a Drywall Contractor in Sacramento
Materials for a 12×12 room cost about $150–$220. Sounds tempting to DIY — but most homeowners underestimate the finishing work: taping, mudding, feathering, sanding, and texturing. A poor finish shows under any light angle. Professional results from Dr. Drywall start at $800 for a single room, with texture matched to your existing walls.
Bottom line: DIY makes sense for tiny patches. For anything larger, the finish quality gap isn’t worth the headache.
Get a Free Drywall Estimate in Sacramento Today
Dr. Drywall serves Sacramento, Roseville, Elk Grove, Folsom, Rancho Cordova, and surrounding areas. With 10+ years of experience and a satisfaction guarantee, we provide upfront pricing with no surprises.
Call (279) 900-6862 — free estimates, same-day response.
Or learn more about our drywall installation services and drywall repair services in Sacramento.
Frequently Asked Questions: Drywall Cost Sacramento CA
How much does drywall installation cost per square foot in Sacramento?
Most Sacramento homeowners pay $2.00 to $3.50 per square foot for drywall installation including labor and materials. Small repair jobs start around $150–$350. Full room installs typically run $800–$1,400 for a standard 12×12 room.
How much does it cost to drywall a 1,000 sq ft house in Sacramento?
A 1,000 sq ft home typically costs $2,000–$3,500 for full drywall installation in Sacramento. This includes hanging, taping, mudding, and a Level 3 texture finish. Fire-rated board, skim coat finish, or high ceilings will increase the price.
Do Sacramento drywall prices include texture matching?
At Dr. Drywall, yes — our quotes include texture matching to your existing walls. Whether you have knockdown, orange peel, or skip trowel, we blend the repair seamlessly. Some contractors quote hanging-only and charge extra for finish work — always ask upfront.
Why is drywall repair more expensive in older Sacramento homes?
Homes built before the 1970s in neighborhoods like Midtown, Land Park, or Curtis Park often have plaster walls (not drywall). Repairing or replacing plaster is more labor-intensive and adds 20–40% to the cost. Also, older homes may require moisture-resistant board in areas where Sacramento’s rainy-season humidity (November–March) has caused recurring dampness.
How long does drywall installation take in Sacramento?
A single-room job takes 1–2 days from hanging to finished texture. A full home (2,000 sq ft) takes about 5–8 days depending on finish complexity. We schedule around your timeline and provide same-day estimates for most Sacramento and Roseville locations.
Does Dr. Drywall serve Roseville and Elk Grove?
Yes — we serve the full Sacramento metro including Roseville, Elk Grove, Folsom, Rancho Cordova, and surrounding Placer and Sacramento County areas. No travel fees for most projects. Call (279) 900-6862 to confirm availability in your area.